|
The
following Third Party Certification Checklists and
Example Forms have been provided for your use. The
Third
Party Certification Checklists
are required to be completed prior to shipment of heating cable used in
Division 1 applications. These checklists complete the factory
review process required by IEEE Standard 515-2004 and approval agencies
such as Factory Mutual Research. The
Example
Forms are provided based on
the requirements set forth in IEEE Standard 515-2004. These forms are
provided for download in Microsoft© Word format for flexibility of
use. |
|
Third
Party Certification Checklist for applications utilizing Mineral
Insulated (MI) heating cable in Class I and II, Division 1 hazardous
locations.
|
Certification
Checklist-CI for MI Cable |
|
Third
Party Certification Checklist for applications utilizing Self-Regulating
(D1-LT and D1-HLT) heating cable in Division 1 hazardous
locations.
|
Certification
Checklist- D1-LT & D1-HLT Cable |
| |
| Back To Top |
|
|
| Design
Basic Data- This form provides
all information required for a complete and accurate heat tracing design. |
Design
Basic Data |
| Division
1/Zone 1 Checklist- This form provides for the additional requirements
for applications in Division 1 or Zone 1 hazardous locations. |
Division
1/Zone 1 Checklist |
| Heater
Commissioning Record- This form provides all information required to
commission an individual heat tracing circuit. |
Heater
Commissioning Record |
| Heater
Installation Record- This Form provides all information required to
verify the proper installation of an individual heat tracing cable. |
Heater
Installation Record |
| Maintenance
Log Record- This form provides all information that may be required
for scheduled and/or periodic maintenance of a heat tracing circuit. |
Maintenance
Log Record |
